Loading
Home
Article
1,225

How do I adjust the Active Blind Spot Detection in my MINI with MINI Operating System 9?

The Lane Change Warning system with active return detects vehicles in your blind spot or vehicles approaching from behind in the adjacent lane.

 

To configure Active Blind Spot Detection, go through the menu as follows:

  1. Apps menu
  2. "Vehicle"
  3. "Driving settings"
  4. "Driver Assistance"
  5. "Safety and warnings"
  6. "Active Blind Spot Detection".
  7. Select the desired setting.

You can configure how many warnings will be shown. However, there may also be an excess of unwarranted warnings of critical situations. 

 

Technologies & Innovations
Models & Equipment
Was this article helpful?

Recommended articles

    6,833

    The Lane Departure Warning system with active return alerts the driver when their vehicle is about to leave the road or lane. An automatic steering intervention helps to keep th...
    6,357

    For equipped vehicles, Forward Collision Mitigation with brake intervention can help to prevent accidents within a certain speed range. To do so, the area around the vehicle is ...
    6,112

    In your MINI, you can deactivate Cruise Control with the "Cruise Control" button on the steering wheel. The button is located on the left side of the steering wheel. Pressing th...
    5,770

    Cruise Control can be switched on as follows: To switch on Cruise Control, press the on/off button on the left side of the steering wheel. To switch on Cruise Control, press th...
    17,279

    Automatic Parking Assistant provides support when parallel parking and parking transverse to the road. In addition, the system makes it easier to park out of parallel and perpen...
    5,285

    The Automatic High Beam Assistant promptly detects other road users as well as the ambient lighting, e.g., in towns, and automatically switches the high-beam headlights on or of...
    4,837

    On inclines, in selector lever position D, L, S, or R, this system prevents the vehicle from rolling opposite the set driving direction and provides drive-off support. Drivin...
    3,615

    The rain sensor automatically controls the wiper operation depending on the intensity of the rainfall. The sensor is located on the windshield, directly in front of the interior...
    3,105

    Depending on the settings, an acoustic signal sounds if the detected speed limit is exceeded or the speed limit changes. The display also flashes if the detected speed limit is ...
    2,983

    Deactivating the system manually: Apps menu "Vehicle" "Driving settings" "Driver Assistance" "Safety and warnings" "Lane Departure Warning" "Off".
    2,864

    Speed Limit Assistant supports driving at the speed limit. You can have speeds suggested by the Speed Limit Assistant adopted by your vehicle's speed control systems. The Speed ...
    1,895

    Curve-Ahead View helps you to adapt your speed to the course of the curve. The intelligent curve anticipation highlights curves on the route in color in the MINI Head-up display...
    1,836

    Automatic Parking Assistant provides support when parallel parking and parking transverse to the road. In addition, the system makes it easier to park out of parallel and perpen...
    1,796

    The Lane Departure Warning system with active return alerts the driver when their vehicle is about to leave the road or lane. An automatic steering intervention helps to keep th...
    1,706

    To activate/deactivate the Side Collision Warning in your MINI with MINI Operating System 9, go through the menu as follows: Apps menu "Vehicle" "Driving settings" "Driver Assis...
    1,581

    The Fatigue Alert system can detect when the driver is less alert using various criteria. The Fatigue Alert break recommendation function can detect driver fatigue, e.g., during...
    1,529

    The Lane Departure Warning menu can be used to configure this function and specify when it should issue warnings. Go through the menu as follows: Apps menu "Vehicle" "Driving se...
    1,417

    The wheels illuminate gray on the Interaction Unit if it is not possible to detect a loss of tire pressure. Possible causes are: – The system may not be operational. – After con...
    1,404

    When the rear window is cleaned, the rearview camera is also cleaned automatically. To clean the rear window, turn the outer switch on the wiper lever as follows: – In rest posi...
    1,342

    The MINI Parking Assistant parks your car for you. It takes over, accelerating, braking and steering to get into parallel and perpendicular parking spaces. Press the Parking A...

MINI AI Assistant

0 / 200

Loading
Active Blind Spot Detection | MINI FAQ